CVT, 5000 VA
This 5000 VA Constant Voltage Transformer holds output voltage steady for electronic and IT equipment using a static, ferroresonant design with no moving parts. With correction happening electrically rather than mechanically, it responds fast and needs little to no maintenance over its working life.
Product Description
At 5000 VA capacity, this CVT accepts an input voltage range of 180-260V and holds output at 220/230V within ±1%, with a response time of 30 milliseconds. Since there’s no motor or moving mechanism involved, voltage correction happens almost instantly rather than through a gradual mechanical adjustment, which is why this range works well for smaller, sensitive electronic loads rather than heavy or inductive machinery.
Output stays sinusoidal, with distortion under 4% at full load, and efficiency holds at approximately 90% under full load conditions. The unit is rated for ambient temperatures from -5°C to 50°C and tolerates load power factor between 0.75 lag and 0.9 lead without any drop in performance.
No Moving Parts
Static ferroresonant design means fewer failure points and virtually no maintenance.
Fast Response
30 millisecond response time protects sensitive electronics before voltage swings reach them.
Clean Output
Sinusoidal output waveform with distortion under 4% at full load keeps connected equipment running on clean power.
Stable Regulation
Output held at 220/230V within ±1%, regardless of input fluctuation between 180-260V.
Wide Operating Range
Functions reliably across ambient temperatures from -5°C to 50°C.
Recommended Applications
- Computers and IT equipment
- Printers and office electronics
- Point-of-sale systems
- Home entertainment and electronic appliances
- Small commercial setups with light, non-inductive loads
Not Recommended For
- High inductive loads like motors and pumps
- Equipment placed close to diskettes, monitors, tapes or other magnetic storage devices, since CVTs should be positioned away from these
- Generator-fed supply where frequency variation exceeds 50Hz ±1Hz
- Industrial machinery and heavy-duty continuous loads
Specifications
| Phase | Single Phase |
|---|---|
| Input Voltage | 180 – 260V, at rated load |
| Output Voltage | 220V / 230V, ±1% |
| Frequency | 50 Hz ±1% |
| Response Time | 30 milliseconds |
| Efficiency | 90% (approx) under full load condition |
| Output Waveform | Sinusoidal |
|---|---|
| Wave Form Distortion | Less than 4% under full load condition |
| Load Power Factor | 0.75 lag to 0.9 lead |
| Ambient Temperature | -5°C to 50°C |
| Effect of Line Frequency | 1% (approx) change in output voltage for every 1% change in line frequency |
| Capavity | 5000 VA |